Our Value Add services include:

  • Automatic fine tolerance cut to length saw
  • 4 AXIS CNC machining product centre up to h=170mm, w=400mm, l=14000mm
  • 3 AXIS CNC machining product centre h=180mm, w=200mm, l=7000mm
  • Our new state-of-the-art 7-axis robotic machining centre
  • CNC extrusion and plate router h=200mm, w=2500mm, l=12,500mm, maximum cut depth = 25mm
  • Drawn products: Precision ovality, work hardened tubing, outer diameter 40mm to 130mm, wall thickness 1.8mm – 10mm
  • Knurling: Application of non-slip surface to extrusions
  • Product edge de-burring
  • Anodising: Controlled oxidation of the aluminium surface by immersion into a dilute sulphuric acid. The oxide film is an integral part of the aluminium surface and is not an applied coating
  • Powdercoating: Paint powder applied electrostatically and then cured under heat to allow it to flow and form a surface coating
  • Drilling: A cutting process that uses a drill bit to cut or enlarge a hole
  • Cut Back: An off line saw used to recut the extrusion to less than a standard length
  • Slotting & Punching: Toolage used to “punch” a hole in typically a window or door extrusion
  • Weather Pile Installation: Mechanically install weather pile to an extrusion.
  • Precision Cutting: Cut back to less than standard extrusion tolerances.
  • Flashings: Supplied from sheet and able to be guillotined or bent.
  • Mitre Saw Cut: Saw used to make accurate cross cuts.

Capral has focused on the requirements of our customers and made a significant investment in our processing and fabrication facilities.